Outdoor Living
Outdoor Spaces Built for Montana Properties
Decks, paver and flagstone surfaces, stonework, and fire features designed as one space and built to hold up to freeze-thaw, snow load, and the way these properties actually get used.
What We Build
Find the Right Starting Point
Most projects here combine two or three of these. Pick the closest fit and we'll work out the rest on-site.
Custom Decks
Best for Mountain homes, view properties, hot tub areas
Trex, cedar, ipe, and hardwood decks framed for Montana snow load and finished with railings that protect the view.
Paver Patios & Walkways
Best for Dining and gathering areas, paths, entry courtyards
Paver and natural stone surfaces built on a proper base, so they stay level through freeze-thaw instead of heaving.
Flagstone & Paver Staircases
Best for Sloped and hillside properties
Massive natural flagstone treads set into the slope, finished with hand-fabricated steel railings.
Outdoor Kitchens & Built-In Grills
Best for Cooking and entertaining outdoors
Stone-veneered grill islands with counters and storage, built into a deck or patio and plumbed for gas.
Timber Pergolas
Best for Shading a patio or deck from afternoon sun
Rough-sawn timber shade structures milled at our own mill and sized for the span, the wind, and the snow.
Stone Masonry & Fire Features
Best for Patios, fireplaces, fire pits, retaining walls
Real stonework in flagstone, slate, and fieldstone, including outdoor fireplaces, fire pits, and seat-height walls.
Concrete & Flatwork
Best for Patios, pads, approaches, hot tub bases
Stamped and stained patios, walkways, and specialty pads placed and finished for freeze-thaw country.
Stone Veneer
Best for Chimneys, facades, outdoor feature walls
Real and manufactured veneer that ties an outdoor space back to the architecture of the house.
Planning
What Shapes an Outdoor Living Project
The base decides everything
Patios and stone move when what is under them moves. Excavation, compacted base, and edge restraint are the difference between a surface that stays flat and one that ripples in three years.
Water has to leave
Every surface needs somewhere for water to go, sloped away from the house and off the paving, or freeze-thaw finds the low spot and works on it all winter.
Snow, ice, and where it lands
Roof shed lines, drift patterns, and shoveling routes all shape where a patio or deck actually belongs, and which surfaces stay safe underfoot in February.
Views, sun, and wind
Orientation decides whether a space gets used. Afternoon sun, evening wind off the bench, and the sight line worth framing are worth settling before layout.
How the pieces connect
Deck to patio, patio to path, path to entry. The transitions are where outdoor spaces feel designed rather than assembled one project at a time.
Build it as one plan
Even when the work happens in phases, planning the whole space up front means footings, drainage, and conduit go in once instead of being retrofitted later.
Good to Know
Questions We Hear a Lot
Can you build the deck, patio, and stonework as one project?
Yes, and it usually turns out better that way. Decks, paver and flagstone surfaces, stone features, and concrete are all work our crews do, so the transitions between them get designed rather than negotiated between separate contractors.
Deck or patio, which makes more sense?
It mostly comes down to grade. Where the ground falls away from the house, a deck spans it. Where grade is close to the door, a paver or flagstone patio sits right on the ground and needs no railing. Many properties end up with both, connected by steps.
Do you work in phases?
Often. A common approach is to build the main surface first and add features such as fire elements, walkways, or a second level in a later season. Planning the whole layout at the start keeps the phasing from costing extra.
When is the best time to build an outdoor space?
Summer through early fall for concrete, base work, and stone, since compaction and curing want dry, warm conditions. Design and estimating in winter and early spring is how the good summer slots get reserved.
Where We Work
Serving Southwest Montana
We're based in Bozeman and work across Gallatin County, Park County, Madison County, Sweet Grass County, and the surrounding Montana communities — from working cattle ranches in Paradise Valley to horse properties in the Gallatin Valley. Don't see your town? Call — we regularly travel for the right project.
- Bozeman
- Livingston
- Paradise Valley
- Emigrant
- Pray
- Gardiner
- Belgrade
- Big Sky
- Big Timber
- Gallatin Gateway
- Manhattan
- Three Forks
- Four Corners
- Clyde Park
- Wilsall
- Ennis
- Butte
- Townsend
- Willow Creek
- White Sulphur Springs
Free Estimates & Measurements · Bozeman, MT
Planning an outdoor space?
Tell us what you picture and we'll walk the site, talk through grade, drainage, and sun, and put honest numbers to it.